English
中文站
Product Center
Product Center PRODUCT
Yutong Precision Machinery Co., Ltd
Contact: Mr. Tang
Mobile: 13929209870
Fax: 0769-81871789
Address: East Gate, No. 75, Fuhai Road, Xiagang, Chang'an Town, Dongguan
Daily maintenance method of centerless grinder
Published on: 2021-07-07 15:45:17 Number of Views:
1412
Daily maintenance method of centerless grinder
1. Maintenance of centerless grinder surface: the surface of centerless grinder, motor and heat dissipation equipment must be kept clean, and the polishing consumables powder must be cleaned regularly.
2. Check and tighten the handle, feed handwheel, screw, nut and other mechanical parts. Keep the machine in good condition.
3. Inspection of centerless grinder: check the tightness of screws, belts and loose parts of centerless grinder until they are adjusted properly.
4. Check the wear degree of each bearing, replace it if damaged, and check whether the lubricating oil is sufficient.
5. The guide rail shall be cleaned and there shall be no polishing consumables powder on the guide rail.
6. Electrical appliances: regularly clean the motor and electrical box. Electrical devices shall be fixed neatly and act reliably.
7. Check and fasten the neutral connection device. Check the button switch. If there is any problem, replace it immediately to avoid unnecessary danger.
Previous:
第一篇 Next:
Simple discussion on reversing process of surface grinder
Copyright ? Copyright 2021 Guangdong Yutong Precision Machinery Co., Ltd
Telephone:13929209870 Fax:0769-81871789
Address:East Gate, No. 75, Fuhai Road, Xiagang, Chang'an Town, Dongguan
Yue ICP Bei ******* No